Kenrik KR3001AR, 1 -Channel Active Receiver
Overview
The Kenrik KR3001AR is a durable, high quality single-channel active receiver that accepts real-time color or monochrome composite (CCTV) video over unshielded twisted pair (UTP) cable from any passive balun or UTP enabled camera up to 3,000 feet. Due to high-grade components and extensive signal conditioning, the KR3001AR provides exceptional interference rejection as well as highly effective equalization and restoration of amplitude, sync, and color.
The KR3001AR is designed to provide stable and reliable high quality video to one individual channel of video that is either experiencing an unusually high amount of interference such as RFI or EMI, a distant camera over 1,000 feet away or a digital device such as a DVR/NVR, digital encoder or a flat panel display that requires above average video quality.
Specifications
Video |
|
| Video Format | NTSC, PAL, SECAM |
| Frequency Response | 2 Hz to 6 MHz |
| Common Mode Rejection | 80dB nominal at power line frequency (50/60 Hz) Better than 60dB, DC to 5 MHz at any video input terminal pair |
| Transient Immunity | IEC 61000-4-2 (ESD) |
| Common Mode Range | 12 Vp-p |
| Wire Type | 100 Ohm, 24 AWG min Unshielded Twisted Pair |
| Wire Category | Cat 3 or better |
Mechanical |
|
| Dimensions | 2.0x4.0x4.125 Inches, 5.08x10.16x10.48cm (HxWxL) |
| Unit Weight | 9.9oz, (.31kg) |
| Material | Extruded Aluminum |
| Power | Detachable 3-Pin plug to an external power supply |
| Connectors | (1) UTP Video Input: Detachable Screw Terminal Block |
| Video output | (1) Female BNC Connector to 75-Ohm Coax |
| Video Present Indicator | Yellow LED |
| Unit Power Indicator | Green LED |
| Power Input | 10.5 to 24 VAC, 50/60 Hz, 3 VA max Wide range of accepted power. See the Main product page. |
